Preventative Maintenance is the single most important thing you can do to ensure a long lifespan for your packaging equipment. Through regularly scheduled preventative maintenance (or PM) visits, an expert technician can flag any wear & tear components that will need replacing before they cause permanent damage to the machine. It’s absolutely vital to your machine’s health… But don’t take our word for it, check your warranty. Most OEMs will not honor the warranty unless you have an established record of service.
It’s always a good idea to start a PM program, but if you’re experiencing any of the following warning signs, you don’t have time to waste!
Warning Signs:
- Getting Out Of Hand
Increased operator intervention likely indicates that your machine is not at its optimal settings for your application. When your equipment was installed, the correct pre-stretch level, heat tunnel temperature, or what-have-you was set. Deviating from those settings could cause undue stress on your machine which ultimately shortens its lifespan. Rather than letting your operators make adjustments that could lead to greater issues, contact a professional to assess your line and improve the reliability and efficiency of your machines. - Roll Call
An increase in stretch film, tape, or shrink wrap usage might indicate an issue with your machine. For example, if your stretch wrapper has a deteriorating film carriage you can see an increase of up to 300% in film cost and usage! If you notice your inventory is depleting faster than usual, your operators could be experiencing increased jams or might be running the package through the machine more than once to ensure a proper seal. This is not recommended, and it may be time for an evaluation. - Make some noise
Anyone who has had to describe the concerning sounds coming from their car to a mechanic knows that sound can not only indicate a problem, it can give you clues as to what it may be. This should go without saying, but if you detect a grinding or screeching sound when your machine is in use, then a professional visit is recommended. - See the light
If there are any warning lights, flashing, or visibly broken pieces, it’s best to let a packaging equipment specialist take a look ‘under the hood.’ When a novice attempts to troubleshoot the machine, there is always a possibility that they worsen the issue! An expert technician knows all the ins and outs of your equipment and can usually tell in short time whether your settings merely need adjusting or if certain components need to be repaired. - Down & Out
Well maintained packaging equipment rarely needs servicing. If your machine frequently requires troubleshooting or repairs to get back up and running, it may be helpful for an expert technician to give it a once over.
During a PM, technicians can identify components that are broken, worn, or may require a deep cleaning to function ideally. A Best Packaging tech will inspect your packaging equipment to identify the cause of any errors or warning on your HMI. If necessary, they will make adjustments to your machine’s settings so as to ensure ideal settings such as the correct pre-stretch level, or heat tunnel temperature. With our assistance, your packaging equipment should run almost or completely autonomously without constant adjustment from the operator. If you’ve seen any of these red flags (or worse —more than one!) on your end of line, why are you still reading this!? Pick up the phone to get your packaging line back on track ASAP.
If you’re still unsure whether your machines are due for maintenance, give Best Packaging Inc. a call at (888) 930-BEST to speak with an experienced technician and discuss what’s best for you and your plant’s needs.
What’s your take? We welcome guest bloggers! E-mail socialmedia@bestpackaging.com if you’d ever like to collaborate.
The success of your operation often relies on the quality of your service technicians to keep your business operating when production volumes are high. It’s important to consider the following points when choosing a service provider that will keep your machines running.
Experience
A qualified technician will be able to repair a variety of makes and models of various machines. Best Packaging, for example, employs only the most experienced and qualified technicians. Our techs have 30+ years of combined experience in the field troubleshooting and repairing end of line packaging equipment.
Value
It’s much more cost effective to maintain than it is to repair. Postponing the maintenance of your equipment could result in a sudden breakdown, forcing you to pay for a more expensive repair. Furthermore, when machines are down this interrupts your ability to do business. A good service technician knows that regular maintenance can make a line last for years. Best Packaging understands the value in preserving your machines. We can create a proper maintenance schedule based on the condition of your equipment to keep you operating optimally. We’ll set up a schedule that best fits around your production and advise when your next PM service comes due. Be weary of companies that don’t offer this service.
Quality Service
A good technician takes the time to do things right and has the customer’s best interest in mind. At Best Packaging, customer satisfaction is our driving force. It is our goal is to provide you with the highest quality service that is going to make your machines more productive and efficient. We are also a leader in innovative designs and we can tailor solutions to meet your specific needs. We’re not attached to one brand, so we won’t force products on you that don’t fit your needs. In fact, our knowledge of numerous brands helps us come up with solutions not conceived by many manufacturers. Choosing the right service provider can help prevent costly repairs and can increase your equipment’s life expectancy.
At Best Packaging, we do more than just repairs. We offer programming and electrical services, as well as retrofits and upgrades to enhance your packaging line while decreasing costs. We service all types of equipment, including stretch wrappers, shrink wrap machines, case tape machines, banding machines, strapping machines, case erectors, and conveyors. If you’re in need of end of line packaging service, call (888) 930 BEST to speak with a tech today.
What’s your take? We welcome guest bloggers! E-mail socialmedia@bestpackaging.com if you’d ever like to collaborate.