Category : Strapping Machine

A Little Preventative Maintenance Goes A Long Way


Imagine you are on a leaky boat.  You might search for the massive hole that’s bringing the boat down even though there are smaller holes constantly popping up. By taking care of the larger hole, you’re really only addressing issues in a singular fashion rather than looking at it holistically. The best way to prevent a water leakage is to consider the holistic success and operation. An operator is always going to struggle as problems arise if they only focus on that particular problem. However if you inspect the boat and make sure there aren’t any holes, you’re going to have a better chance at staying afloat.

Stretch wrappers, Case Erectors, Shrink Wrappers, Case Sealers, Strappers, Tapers- you name it, these are all very complex pieces of packaging equipment expected to optimize your production line for efficient packaging processes. If maintained properly, these machines can last years without any problems or breakdowns.

Periodic maintenance is important.

Most companies search for major causes that could be responsible for the problems, yet overlook the minor causes that contribute to the big problem. To ensure that your business model can be upheld in the long run, it’s important to follow up and check on the reliability of your machines. Inspecting your machines can reduce the likelihood of any disastrous maintenance issues that might arise unexpectedly.  After all, it’s much easier, less stressful, and less costly to prevent problems than it is to interrupt workflow to repair them.  A lack of preventive maintenance is a major cause of downtime, so this is a good opportunity to catch potential problems before they develop into larger issues and make sure your machine is running smoothly.

While your packaging equipment doesn’t require constant care, just a little bit of attention from time to time can go a long way toward avoiding downtime and more costly repairs down the road. So rather than spending money on unexpected repairs, you might want to invest in periodic preventative maintenance program.

At Best Packaging, we service end of line packaging equipment. We perform repairs and PM’s on a variety of different packaging equipment. We provide highly trained, well-qualified employees who are not only concerned with maintaining your machines, but we also seek to maximize the performance. Best Packaging prides ourselves in delivering top notch care to keep you running seamlessly for years to come. Give us a call at (888) 930 BEST to schedule a PM or click here.

What’s your take? We welcome guest bloggers! E-mail socialmedia@bestpackaging.com if you’d ever like to collaborate.

Best Packaging Machinery Philosophy


At Best Packaging we maintain and repair some of the most complex packaging lines. Since 1997, we have been consulting, designing, and implementing packaging solutions to offer the best for your operations.  In order to deliver our customers the greatest return on their investment, we represent a variety of different brands of end-of-line packaging equipment to ensure we’re matching the right solution for your customer needs.

There’s no ‘one size fits all’ solution.

Rather than discover that a particular solution doesn’t fit your application, our knowledge of numerous brands can help you come up with solutions not conceived by many manufacturers. In order to arrive at the appropriate solution, you need someone who isn’t attached to one brand and won’t force products on you that don’t fit your needs. When seeking assistance from a particular manufacturer, they typically recommend a solution suitable to their business model. You also run the risk of the manufacturer being unqualified to support your operations on a large scale because of the limited knowledge of machinery outside their own. For instance, a common situation we come across is that after a technician makes an initial repair, other machines in the same production line stop running correctly. The reason being is that most manufacturer technicians don’t have the know-how to recalibrate a whole production line. You need someone who’s going to understand the bigger picture.  At Best Packaging, we have the expertise to reprogram your entire production line to achieve maximum efficiency. You don’t have to worry if your brand is serviceable. We specialize in a wide range of packaging equipment and can direct you to the solution that will ensure your business improves in material handling, and supply chain performance.

Not all stretch wrappers are created equally.

We only align ourselves with quality brands to make sure we are delivering the best value.  It is our goal is to provide you with the high quality service that is going to eliminate failures to make your job not only more productive, but hopefully easier. Most end-of-line equipment brands offer different capabilities in terms of ease, automation, integration, and performance. With our extensive analysis of packaging machinery, we understand the strengths and weaknesses of various equipment. Representing a variety of different brands enables us to match the best systems based on your customer needs and the versatility of the job.  For more information on our machinery philosophy, visit bestpackaging.com or contact us at (888) 930 BEST.

What’s your take? We welcome guest bloggers! E-mail socialmedia@bestpackaging.com if you’d ever like to collaborate.

Service Success Story: Conveyor Installation & Strapping Machine Repair


At Best Packaging Inc., we work hard to provide you customized solutions that best fit your needs. Last month, we got a call from a customer to reconfigure their plant’s main conveyor line in order to accommodate seven new plastic mold injection machines. With our techs on site, Best Packaging helped install over 100 feet of new conveyor equipment. The conveyor extension was complete with loading stations and pneumatic pop up sections. The Best Packaging technicians also replaced the out-dated stretch wrapper with a state-of-the-art fully automatic Lantech® stretch wrapper integrated into the conveyor. To top it off, we installed a new control panel, two Polychem® strapping machines, and a bar code scanner to notify the system on which pallets to wrap and which to strap. Our technicians are trained on all packaging brands and equipment. Whether you need a consultation on your machines, a Preventative Maintenance program or a reliable emergency service team, be sure to give us a call at (888) 930 BEST.

What’s your take? We welcome guest bloggers! E-mail socialmedia@bestpackaging.com if you’d ever like to collaborate.

Service Success Story- Strapping Machine


Faulty machinery is a real pain in the back! That was certainly the case for a Chicago-area canned food manufacturer whose inline pallet strapper broke down. Material handlers had resorted to manually palletizing and banding layers upon layers of heavy cans. As a result of the broken strapper, production at this facility was reduced by 50%.

That was when the discomforted cannery called the toll-free number for Best Packaging and scheduled a diagnostic appointment for the same day. When the technician arrived, he received background information from the support engineer and immediately began troubleshooting. He noticed the feed module’s motor was spinning, but the module was not feeding.

Usually, the most obvious answer is the correct one, but this was the exception that proves the rule. Typically, when technicians receive a feed error, it indicates a faulty feed module. The support engineer certainly suspected so and was surprised when Best Packaging discovered the real issue. What couldn’t be seen with the naked eye, was that the motor was not fast enough and could not pick up enough torque to feed properly. The feed module itself worked fine, but the board supplying current to the feed module was at fault. The feed module was not receiving enough current.

New parts for their board were required to remedy the inline strapper and alleviate the employees. With Best Packaging’s expertise, the right part was quickly identified, and they coordinated the order directly from the equipment manufacturer. The strapper was transported to Best Packaging’s workshop at the request of the customer to streamline their production area in the interim. The support engineer, line supervisor, and all the laborers at the cannery grew eager for the new parts to arrive as their team began to experience ergonomic constraints from manually pushing pallets.

Finally, new parts for the board arrived at Best Packaging’s workshop. Because the machine was already there, technicians could complete the installation of new parts quickly, without having to schedule a service visit.

With Best Packaging’s help, this purveyor of canned goods regained 100% productivity and put an end to their sciatic saga. Malfunctioning equipment is not always what it appears to be, so next time faulty packaging equipment has you puzzled (or even pained) call the packaging equipment specialists at Best Packaging: 888-930-BEST

What’s your take? We welcome guest bloggers! E-mail socialmedia@bestpackaging.com if you’d ever like to collaborate.

If You Can Wrap It, We Can Fix It


Picture this … It’s 3rd shift and your line goes down. Time is of the essence and to leave it until the morning could impact the bottom line and important shipments. That is where our 20+ years of combined experience and training on all brands and types of machinery can come to the rescue.

When a packaging line becomes faulty or fails, Best Packaging understands the urgency in fixing the problem immediately. That is why we are available 24 hours a day, seven days a week for emergency service. While some manufacturers recommend solutions that match their own personal business model, we recognize the BEST solution that fits each customer unique repair needs. If you find yourself in situation where you need one of your packaging machine parts repaired, you can count on our certified technicians to offer you on-site service or step by step instructions so that your staff can safely operate the machine. It is also highly recommended that you keep spare equipment parts on hand just in case. Therefore, Best Packaging works with trusted, reliable packaging equipment manufacturers to access the right parts for you. These are just a few examples of Best Packaging going above and beyond to save our clients time and money.

At Best Packaging, we make it a priority assist you with anything from installation to performance optimization. We offer spare packaging equipment parts and customized maintenance plans that will keep your equipment functioning at top performance levels. For more information on how Best Packaging can help with your packaging equipment repair needs, contact us at (888) 930 BEST

What’s your take? We welcome guest bloggers! E-mail socialmedia@bestpackaging.com if you’d ever like to collaborate.

If It’s Not Broken, Keep It That Way


The term ‘If it’s not broken, don’t fix it’ still applies to many industries. However, with preventative maintenance that phrase becomes “If it’s not broken, keep it that way.”

With packaging equipment, there are many common problems that can arise. Therefore, it’s important to establish a proper preventative maintenance program. The purpose of a preventative maintenance program is to provide long term maintenance and quality care in order to avoid any unplanned problems that might arise.

Simple preventive maintenance not only extends the life of your packaging equipment, it keeps money in your pocket for the days ahead. Companies that don’t participate in a preventative maintenance program are essentially waiting for a problem to happen, and this is often a very costly move. A case study performed by The Association for Packaging and Processing Technologies shows that PM generates a solid rate of return in terms of risk mitigation and asset protection (Koo 4). In other words, an investment in PM not only pays for itself, but it also produces a huge return on the investment. With PM, efforts are focused on preventing equipment failure rather than responding to emergencies, which has proven to be much cheaper and faster than big repairs.

Without a proper protocol to keep your packaging equipment in good condition , it can be very challenging to run a stable, consistent business. An unexpected failure can result in idle employees, halting the production line, missed deadlines, and long-term damage to their brand. With PM, however, companies are able to recognize problems earlier thereby eliminating the chance of machine breakdowns.

Best Packaging understands the financial impact of a packaging line not running properly or not running at all. Our trained service technicians can assist with your ongoing maintenance requirements to keep your packaging equipment healthy and running at maximum efficiency. We also offer thorough training to make sure your operators are confident running the equipment.

Don’t wait until the entire machine goes down and money is lost while it is out of commission. Prevent major catastrophes by stopping the problem before it starts. Call Best Packaging at (888) 930 BEST or click here to schedule a PM today.

What’s your take? We welcome guest bloggers! E-mail socialmedia@bestpackaging.com if you’d ever like to collaborate.

Call Now Button888-930-2378